🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: sci.electronics
Article #16847

Re: Zenith TV Problem

#16847
From: Jerry Long
Date: Wed, 27 Jan 1993 20:29
30 lines
1473 bytes
Dru Nelson (dnelson@newssun.med.miami.edu) wrote:
: 
:   Hello,
: 
:      I got this set which started taking time to warm up.  


if TV is rather new, this probably is relative to the CRT heater
voltage. Does sound come on immediatly?


:      It makes a loud buzzing noise and creates sparks from
:      the ground "feelers" that touch the top right corner of the tube.
 
these feelers are usually for static charge bleed-off. If you are seeing
sparks from these, chances are the high voltage is present.

:      ... it leaves an ozone kind of smell.  My only guess is that it
:      is the high voltage/sweep module.
: 
again it sounds as though the high voltage is on due to the presence
of ozone. I would start with the main power supply advancing to the
secondary supplies which are part of the HOT circuity. 
It is also possible the HV has become non-regulated and sky-rocketing
which would also give lots of sparks, noise, ozone etc..


Good luck.

Jerry Long @spk.hp.com
Technical Details
Message-ID: <C1J4xq.11D@spk.hp.com>
Path: arc1-ca.pugleaf.net!sparky!uunet!charon.amdahl.com!amdahl!rtech!decwrl!ames!saimiri.primate.wisc.edu!sdd.hp.com!hp-cv!hp-pcd!hpspkla!long
References: <1993Jan27.193724.5170@newssun.med.miami.edu>

Show Full Headers
Complete Article Headers
Newsgroups: sci.electronics
Path: arc1-ca.pugleaf.net!sparky!uunet!charon.amdahl.com!amdahl!rtech!decwrl!ames!saimiri.primate.wisc.edu!sdd.hp.com!hp-cv!hp-pcd!hpspkla!long
From: long@spk.hp.com (Jerry Long)
Subject: Re: Zenith TV Problem
Message-ID: <C1J4xq.11D@spk.hp.com>
Sender: news@spk.hp.com
Organization: Hewlett-Packard
X-Newsreader: TIN [version 1.1.4 PL6]
References: <1993Jan27.193724.5170@newssun.med.miami.edu>
Date: Wed, 27 Jan 1993 20:29:49 GMT
Lines: 32