Re: >= 5W AM-band amp design?

Article View: sci.electronics

Article #16945

#16945

From: System Administration
Date: Mon, 11 Jan 1993 07:30

23 lines
1483 bytes

svaldez@ocf.berkeley.edu (Steve Valdez) writes:

>    CVan someone point me to a source for a circuit design which
>    can take the 100mw output from my Panaxis AM transmitter (at 1500kHz)
>    and amplify it to somewhere between 5W and 20 or 30W?  
> 
>    How does one create an amp in parallel to provide greater gain?

Aside from the public service announcements about this being a no-no,
the easiest way would be modify an existing 160 meter design
to do this.  Either modify an existing unit or use some of the
advaible plans for this type of HAM equipment.

There are dozens of small tube amp projects that could be modified
for this from sub-1 Watt to a 1500 watt design in the ARRL Bible...

Hale Telecommunications Inc.        Public Access Internet Site (hale.cts.com)
Owned by a happily armed            (619)/660-6734 V.32bis                
conservative republician.           NYC has gun control.                       

-----   Magic Johnson Knows How To Dribble More Than Just A Basketball!   -----

Technical Details

Message-ID: <P2B8wB1w165w@hale.cts.com>

Path: arc1-ca.pugleaf.net!sparky!uunet!gatech!usenet.ins.cwru.edu!agate!dog.ee.lbl.gov!news!nosc!crash!hale!system

References: <1993Jan10.005856.26077@sol.ctr.columbia.edu>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!sparky!uunet!gatech!usenet.ins.cwru.edu!agate!dog.ee.lbl.gov!news!nosc!crash!hale!system
From: system@hale.cts.com (System Administration)
Newsgroups: sci.electronics,alt.radio.pirate
Subject: Re: >= 5W AM-band amp design?
Message-ID: <P2B8wB1w165w@hale.cts.com>
Date: Sun, 10 Jan 93 23:30:36 PST
References: <1993Jan10.005856.26077@sol.ctr.columbia.edu>
Organization: Hale Telecommunications Inc.
Lines: 23

Reply to Parent Message