Article View: sci.electronics
Article #16974Re: EPROM programming info.
From: Daniel Mueller
Date: Mon, 11 Jan 1993 16:51
Date: Mon, 11 Jan 1993 16:51
17 lines
1039 bytes
1039 bytes
Tom. Adams 529-7860 (tadams@sbctri.sbc.com) wrote: : : Are all, say, 2764's programmed the same or do different manufacturers : use different times and voltages? Where can I find out more about this? : -- Hi Tom You should expect different programming voltages; the optimal timing may also be different. But don't worry about that too much with your programmer. The programming may take a little longer (if puls prog. mode is used) but you'll get your EPROM .. Anyway, you will find all details in the data books. juerg at ethz switzerland
Technical Details
Message-ID:
<1993Jan11.165157.27506@bernina.ethz.ch>Path:
arc1-ca.pugleaf.net!sparky!uunet!mcsun!chsun!bernina!stettbacReferences:
<1993Jan8.144544.4162@sbctri.sbc.com>Show Full Headers
Complete Article Headers
Newsgroups: sci.electronics Path: arc1-ca.pugleaf.net!sparky!uunet!mcsun!chsun!bernina!stettbac From: stettbac@isi.ethz.ch (Daniel Mueller) Subject: Re: EPROM programming info. Message-ID: <1993Jan11.165157.27506@bernina.ethz.ch> Sender: news@bernina.ethz.ch (USENET News System) Organization: Swiss Federal Institute of Technology (ETH), Zurich, CH X-Newsreader: TIN [version 1.1 PL8] References: <1993Jan8.144544.4162@sbctri.sbc.com> Date: Mon, 11 Jan 1993 16:51:57 GMT Lines: 18