Re: need advice on TV sound amplifier

Article View: sci.electronics

Article #17582

#17582

From: Daniel F. Luna
Date: Fri, 08 May 1987 09:34

13 lines
1127 bytes

   Another problem that you may be experiencing is that there is a (probably)
substantial impedance mismatch between the headphone jack and the amp you are 
using.  Usually headphones are 8ohms, and input to line amps are on the order
of 10's of thousands.  Although in this direction (low to high) things work,
they are not efficient, and much power is lost.  Try adding an impedance matching
device like an 8ohm to 10K transformer in the line.

-- 
Daniel F. Luna 
PC-Person.
uucp: ...rochester!ur-tut!alab
arpa: ur-tut!alab@rochester

Technical Details

Message-ID: <1288@ur-tut.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!rochester!ur-tut!alab

References: <578@stracs.cs.strath.ac.uk> <566@neoucom.UUCP>

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!rochester!ur-tut!alab
From: alab@ur-tut.UUCP (Daniel F. Luna)
Newsgroups: sci.electronics
Subject: Re: need advice on TV sound amplifier
Message-ID: <1288@ur-tut.UUCP>
Date: Fri, 8-May-87 05:34:42 EDT
Article-I.D.: ur-tut.1288
Posted: Fri May  8 05:34:42 1987
Date-Received: Sat, 9-May-87 18:47:40 EDT
References: <578@stracs.cs.strath.ac.uk> <566@neoucom.UUCP>
Reply-To: alab@tut.cc.rochester.edu.UUCP (Daniel F. Luna)
Organization: Univ. of Rochester Computing Center
Lines: 13

Reply to Parent Message