🚀 go-pugleaf

In article <467@rlvd.UUCP>, news@rlvd.UUCP (News) writes:
> In article <583@inuxh.UUCP> rmrin@inuxh.UUCP (D Rickert) writes:
> >
> >Neutral and ground should be tied together.  Look out for the outlets
> >in which it isn't.  
> 
> Neutral and ground should NEVER be tied together. Ask yourself what is the
> point of having seperate lines if you are going to join them
> together. The reasons for keeping them separate are to do with the
> safety of the earth protection in the event of a Neutral fault. 

I think that part of the confusion here is that no one has ever defined
what they mean by "tied together."  If what you mean is "visibly connected
with a wire" then, as previously stated, it is imperative that they be
connected only at the service entrance.  However, I suspect that the
D Rickert and the original poster meant that AFTER DISCONNECTING THE MAIN
CIRCUIT BREAKER, if you check neutral and ground with a ohmmeter, you will
find them shorted together.  In this case, you should worry if they
aren't connected because the neutral is not providing you with any
protection.
-- 
Peter Fales		UUCP:	...ihnp4!ihlpe!psfales
			work:	(312) 979-7784
				AT&T Information Systems, IW 1Z-243
				1100 E. Warrenville Rd., IL 60566