Re: PC board photo etching kits

Article View: sci.electronics

Article #17713

#17713

From: Doug Gwyn
Date: Sun, 12 Jul 1987 21:12

3 lines
818 bytes

I just recalled that someone had suggested drying a cleaned board
with compressed air.  Be advised that some (maybe most) sources of
compressed air add a non-negligible amount of oil to the air.

Technical Details

Message-ID: <6111@brl-smoke.ARPA>

Path: arc1-ca.pugleaf.net!utzoo!mnetor!uunet!seismo!husc6!cmcl2!brl-adm!brl-smoke!gwyn

References: <2392@uwmcsd1.UUCP> <2868@mit-hermes.AI.MIT.EDU> <865@omepd>

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!mnetor!uunet!seismo!husc6!cmcl2!brl-adm!brl-smoke!gwyn
From: gwyn@brl-smoke.ARPA (Doug Gwyn )
Newsgroups: sci.electronics,comp.sys.apple
Subject: Re: PC board photo etching kits
Message-ID: <6111@brl-smoke.ARPA>
Date: Sun, 12-Jul-87 17:12:52 EDT
Article-I.D.: brl-smok.6111
Posted: Sun Jul 12 17:12:52 1987
Date-Received: Mon, 13-Jul-87 04:56:32 EDT
References: <2392@uwmcsd1.UUCP> <2868@mit-hermes.AI.MIT.EDU> <865@omepd>
Reply-To: gwyn@brl.arpa (Doug Gwyn (VLD/VMB) <gwyn>)
Organization: Ballistic Research Lab (BRL), APG, MD.
Lines: 3

Reply to Parent Message