Article View: sci.electronics
Article #17834Re: TTL Questions
From: Rex Jolliff
Date: Mon, 20 Jul 1987 10:05
Date: Mon, 20 Jul 1987 10:05
38 lines
1747 bytes
1747 bytes
Expires:
Sender:
Followup-To:
In article <1008@speech1.cs.cmu.edu> (Paul Dietz) writes:
>In article <1395@crash.CTS.COM> rpluth@pnet01.CTS.COM (Ron Pluth) writes:
>> 1. What's the easiest way to go about interfacing a TTL
>>output (from, say, a standard S or LS AND gate) to a relay, for
>>...
>...
>A much easier solution is to use a low current, 5-volt relay. Then almost
>any of the serious driver chips can drive it directly.
Shouldn't you shunt the relay with a diode to prevent back-emf spikes??
(I don't exactly remember... It's been a while since I've done something
like this...)
>
>
>Paul H. Dietz
>Carnegie Mellon University
this
is
line counter
food
--
Rex Jolliff (rex@otto.UUCP, {akgua,ihnp4,mirror,sdcrdcf}!otto!rex)
The Sun Newspaper - |Disclaimer: The opinions and comments in
Nevada's Largest Daily Morning | this article are my own and in no way
Newspaper | reflect the opinions of my employers.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
What happened to our superior space program?
Technical Details
Message-ID:
<502@otto.COM>Path:
arc1-ca.pugleaf.net!utzoo!mnetor!uunet!seismo!ut-sally!utah-cs!utah-gr!stride!tahoe!unsvax!jimi!otto!rexReferences:
<1395@crash.CTS.COM> <1008@speech1.cs.cmu.edu>Show Full Headers
Complete Article Headers
Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: arc1-ca.pugleaf.net!utzoo!mnetor!uunet!seismo!ut-sally!utah-cs!utah-gr!stride!tahoe!unsvax!jimi!otto!rex From: rex@otto.COM (Rex Jolliff) Newsgroups: sci.electronics Subject: Re: TTL Questions Message-ID: <502@otto.COM> Date: Mon, 20-Jul-87 06:05:58 EDT Article-I.D.: otto.502 Posted: Mon Jul 20 06:05:58 1987 Date-Received: Thu, 23-Jul-87 06:46:27 EDT References: <1395@crash.CTS.COM> <1008@speech1.cs.cmu.edu> Reply-To: rex@otto.UUCP (Rex Jolliff) Distribution: na Organization: Las Vegas Sun Lines: 31 Keywords: relay driver diode Summary: you forgot your diode...