Article View: sci.electronics
Article #17912CCD driver/controller
From: Mike Finegan
Date: Thu, 13 Aug 1987 13:38
Date: Thu, 13 Aug 1987 13:38
16 lines
1382 bytes
1382 bytes
Does anyone have experience, or know where information can be found about, using a chip to controll a Charge Couple Device - preferably 256 by 256 monochrome - and yield digital output? The desired output would be 8 bits/pixel at <= 3 microseconds/pixel average. It wouldn't matter if the CCD and chip were a set, as long as it isn't outrageously expensive. If there is no such controller, does anyone have recommendations about the simplest CCD to use, and what A/D will let me unload the CCD to ram inless than 1/5 of a second? Any suggestions, or sources of further information will be greatly appreciated. Mike Finegan Electrical & Computer Engineering University of Cincinnati (513) 475-2055 ...hal!uccba!ucece1!finegan
Technical Details
Message-ID:
<1207@uccba.UUCP>Path:
arc1-ca.pugleaf.net!utzoo!mnetor!uunet!seismo!husc6!cmcl2!phri!uccba!fineganReferences:
<7105@alice.UUCP> <764@sol.ARPA> <128@umich.UUCP> <20036@ucbvax.BERKELEY.EDU>Show Full Headers
Complete Article Headers
Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: arc1-ca.pugleaf.net!utzoo!mnetor!uunet!seismo!husc6!cmcl2!phri!uccba!finegan From: finegan@uccba.UUCP (Mike Finegan) Newsgroups: sci.electronics Subject: CCD driver/controller Message-ID: <1207@uccba.UUCP> Date: Thu, 13-Aug-87 09:38:55 EDT Article-I.D.: uccba.1207 Posted: Thu Aug 13 09:38:55 1987 Date-Received: Sat, 15-Aug-87 10:48:45 EDT References: <7105@alice.UUCP> <764@sol.ARPA> <128@umich.UUCP> <20036@ucbvax.BERKELEY.EDU> Organization: Univ of Cincinnati, College of Business Admin. Lines: 16 Keywords: TTL, pullups Summary: CCD driver/controller