🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: sci.electronics
Article #18127

Oscilloscope add-on for PC

#18127
From: MHx7079 mh
Date: Wed, 14 Oct 1987 15:33
18 lines
1279 bytes
I noticed in a new Heathkit catalog that Heath sells
a kit for an oscilloscope add-on for a PC.  It
has two 50 MHz channels with 256-bit resolution, and
connects to a PC (or any other computer) via a rs-232 port.
There are no controls on the box, just 2 BNC sockets for the
probes.  The specs indicate that it has a good range of capabilities
in the areas of triggering and adjustable horizontal sweep times and
vertical sensitivities.  It comes with source code (in Basic)
for the software.  It cost $400.

This sounds neat.  Has anyone seen or used one?
How much would a comparable real scope cost?
Does anyone know anything about similar products
on the market?
-- 

Doug Braun		AT+T Bell Labs, Murray Hill, NJ
m10ux!braun		201 582-7039
Technical Details
Message-ID: <395@m10ux.UUCP>
Path: arc1-ca.pugleaf.net!utzoo!mnetor!uunet!husc6!necntc!ames!lll-tis!lll-lcc!ptsfa!ihnp4!homxb!mhuxt!m10ux!braun

Show Full Headers
Complete Article Headers
Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!mnetor!uunet!husc6!necntc!ames!lll-tis!lll-lcc!ptsfa!ihnp4!homxb!mhuxt!m10ux!braun
From: braun@m10ux.UUCP (MHx7079 mh)
Newsgroups: sci.electronics,comp.sys.ibm.pc
Subject: Oscilloscope add-on for PC
Message-ID: <395@m10ux.UUCP>
Date: Wed, 14-Oct-87 11:33:27 EDT
Article-I.D.: m10ux.395
Posted: Wed Oct 14 11:33:27 1987
Date-Received: Sat, 17-Oct-87 05:34:06 EDT
Organization: AT&T Bell Labs, Murray Hill
Lines: 18
Keywords: PC oscilloscope