Article View: sci.electronics
Article #18224Re: Living near high tension lines
From: Larry Lippman
Date: Thu, 12 Nov 1987 18:43
Date: Thu, 12 Nov 1987 18:43
29 lines
2294 bytes
2294 bytes
In article <1788@bloom-beacon.MIT.EDU>, eichin@athena.mit.edu (Mark W. Eichin) writes:
> I suspect it would be electric, not magnetic field effects that
> matter, mainly from the propaganda stuff I have seen with people
> walking under high-tension lines holding Flourescent tubes and having
> them glow...
It only takes a few microamperes of current at several hundred volts
to ionize the gas in a fluorescent lamp. If you held one end of the lamp in
one hand, while pointing the other end upward toward the power line - you
may well have a sufficient potential difference to ionize the gas - provided
you can get close enough, and provided there is enough voltage (lower voltage
lines like 4.16 kV won't create enough of a field close to the ground). The
lamp won't be bright enough to be really useful, however.
If you recall my recent article on the power line E-field, the
_potential_ is there, but the effective impedance will be much to high
to get any useful current flow unless you increase the length and cross-
sectional area of the pickup wire to a significant amount (as in my
1,000 foot wire example). Also, in simple terms, the pickup wire functions
as a voltage divider when the distance between it and the power line, and
the earth is considered.
> someone want to work out that math?
Thanks, but no thanks. I did my share already. :-)
<> Larry Lippman @ Recognition Research Corp., Clarence, New York
<> UUCP: {allegra|ames|boulder|decvax|rutgers|watmath}!sunybcs!kitty!larry
<> VOICE: 716/688-1231 {hplabs|ihnp4|mtune|utzoo|uunet}!/
<> FAX: 716/741-9635 {G1,G2,G3 modes} "Have you hugged your cat today?"
Technical Details
Message-ID:
<2226@kitty.UUCP>Path:
arc1-ca.pugleaf.net!utzoo!mnetor!uunet!husc6!hao!boulder!sunybcs!kitty!larryReferences:
<9312@tekecs.TEK.COM> <1718@bloom-beacon.MIT.EDU> <1913@frog.UUCP> <1788@bloom-beacon.MIT.EDU>Show Full Headers
Complete Article Headers
Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: arc1-ca.pugleaf.net!utzoo!mnetor!uunet!husc6!hao!boulder!sunybcs!kitty!larry From: larry@kitty.UUCP (Larry Lippman) Newsgroups: sci.electronics Subject: Re: Living near high tension lines Message-ID: <2226@kitty.UUCP> Date: Thu, 12-Nov-87 13:43:30 EST Article-I.D.: kitty.2226 Posted: Thu Nov 12 13:43:30 1987 Date-Received: Sat, 14-Nov-87 18:46:26 EST References: <9312@tekecs.TEK.COM> <1718@bloom-beacon.MIT.EDU> <1913@frog.UUCP> <1788@bloom-beacon.MIT.EDU> Organization: Recognition Research Corp., Clarence, NY Lines: 29 Summary: Fluorescent lamps...