Article View: sci.electronics
Article #18373Re: Wire-wrap Question
From: John Greene
Date: Fri, 15 Jan 1988 18:35
Date: Fri, 15 Jan 1988 18:35
15 lines
1205 bytes
1205 bytes
>
>Does anybody know if wire-wrap can be used to build a reliable proto-type
>at 20 Mhz clock rates and what techniques can be employed minimize
>problems ? I am trying to determine the feasibility building a homebrew
>computer using 20 Mhz 80386 chipset.
>
We have wire-wrapped several boards with clock rates of 20 and 30 MHz with
little or no trouble. The main concern is to keep the wires as short as
possible and bypass, bypass, bypass.
--
John E. Greene "People are just like frankfurters....You have to decide
if you're going to be a hot dog or just another wiener" DLR
TRW Information Networks Division 23800 Hawthorne Blvd, Torrance CA 90505
ARPA: johng@trwind.TRW.COM USENET: ..trwrb!trwind!johng
Technical Details
Message-ID:
<290@trwind.TRW.COM>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!water!watmath!clyde!cbosgd!ihnp4!ptsfa!ames!sdcsvax!ucsdhub!hp-sdd!hplabs!sdcrdcf!trwrb!trwind.TRW.COM!johngReferences:
<7110004@hpcupt1.HP.COM>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!water!watmath!clyde!cbosgd!ihnp4!ptsfa!ames!sdcsvax!ucsdhub!hp-sdd!hplabs!sdcrdcf!trwrb!trwind.TRW.COM!johng From: johng@trwind.TRW.COM (John Greene) Newsgroups: sci.electronics Subject: Re: Wire-wrap Question Message-ID: <290@trwind.TRW.COM> Date: 15 Jan 88 18:35:48 GMT References: <7110004@hpcupt1.HP.COM> Reply-To: johng@trwind.UUCP (John Greene) Organization: TRW Information Networks Division, Torrance C.A. Lines: 15