Article View: sci.electronics
Article #18584Re: X10 specs/parameters
From: Kekatos
Date: Tue, 16 Feb 1988 17:57
Date: Tue, 16 Feb 1988 17:57
14 lines
1106 bytes
1106 bytes
In article <960@ur-tut.UUCP> syap@ur-tut.UUCP (James Fitzwilliam) writes: > >Are parameters for the X10 system publicly available, if so, where? i.e. >what must be broadcast on the AC line for "Unit E-15 / Dim / All off" I'm >interested in a telephone controller that would respond to touch-tones, >but since I have the Powerhouse I would rather not get the Homeminder, so: > James This subject is lively on the 'misc.consumers.house' newsgroup. There have been several magazine articles about building controllers. Subscribe there and look for "home automation" and "X-10". You could then try posting same request on misc.consumer.house
Technical Details
Message-ID:
<2458@ihuxv.ATT.COM>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!water!watmath!clyde!cbosgd!ihnp4!ihuxv!tedkReferences:
<960@ur-tut.UUCP>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!water!watmath!clyde!cbosgd!ihnp4!ihuxv!tedk From: tedk@ihuxv.ATT.COM (Kekatos) Newsgroups: sci.electronics Subject: Re: X10 specs/parameters Keywords: x10 BSR Leviton remote automation Message-ID: <2458@ihuxv.ATT.COM> Date: 16 Feb 88 17:57:20 GMT References: <960@ur-tut.UUCP> Reply-To: tedk@ihuxv.UUCP (55624-Kekatos,T.G.) Distribution: na Organization: AT&T Bell Laboratories - Naperville, Illinois Lines: 14