Article View: sci.electronics
Article #18598Re: X-Ray countermeasures (was Robocop spotted (Photo radar enforcement))
From: Zigurd R. Mednieks
Date: Thu, 18 Feb 1988 14:45
Date: Thu, 18 Feb 1988 14:45
20 lines
1464 bytes
1464 bytes
In article <1358@vaxb.calgary.UUCP> hermann@calgary.UUCP (Michael Hermann) writes: > >An electrical engineering friend of mine had the simplest solution for radar >counter-measures: run a spark-plug wire to your radio antenna (after This seems to be the simplest, most practical jamming system I've yet heard of. Anyone have any suggestion for how to build a switch I could safely operate from the dashboard to shunt a spark-plug wire through an antenna (it need not be the radio antenna). Perhaps a loop of copper braid attached to the inside of the plastic grille would do? Any solenoid switches out there that wouldn't weld shut when switching spark-plug voltages and currents? -Zigurd -- ------------------------------------------------------------------------ Zigurd Mednieks MURSU Corporation (617)424-0146 25 Exeter Street Boston, MA 02116
Technical Details
Message-ID:
<8191@eddie.MIT.EDU>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!water!watmath!clyde!rutgers!mit-eddie!zrmReferences:
<602@anasaz.UUCP> <342@tandem.UUCP> <610@anasaz.UUCP> <19869@bu-cs.BU.EDU> <1358@vaxb.calgary.UUCP>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!water!watmath!clyde!rutgers!mit-eddie!zrm From: zrm@eddie.MIT.EDU (Zigurd R. Mednieks) Newsgroups: sci.electronics Subject: Re: X-Ray countermeasures (was Robocop spotted (Photo radar enforcement)) Keywords: High voltage, noise transmitter, switching Message-ID: <8191@eddie.MIT.EDU> Date: 18 Feb 88 14:45:43 GMT References: <602@anasaz.UUCP> <342@tandem.UUCP> <610@anasaz.UUCP> <19869@bu-cs.BU.EDU> <1358@vaxb.calgary.UUCP> Reply-To: zrm@eddie.MIT.EDU (Zigurd R. Mednieks) Organization: MIT, EE/CS Computer Facilities, Cambridge, MA Lines: 20