🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: sci.electronics
Article #18685

Re: x-10 questions

#18685
From: Jerry Aguirre
Date: Tue, 23 Feb 1988 20:55
23 lines
1503 bytes
In article <1010@uop.edu> todd@uop.edu (Dr. Chrontab) writes:
>Now that everyone has hooked up the x-10 to everything except the
>toilet...
>
>What will it do to your power supply (i.e. breakers or fuses)
>
>when you punch "all lights on" and this is lots of power??

I doubt that you will have any problem with lights.  A distribution
system such as your house has is limited in total power but is too small
to be affected by sudden changes.  The power station and distribution
grid is affected by sudden changes but I doubt that they will notice
what one house is doing.

The exception to this is turn on surge.  Some devices draw a lot more
current when first turned on.  Motors are the worst culprit.  A 10 Amp
motor might draw >40 amps for a few seconds.  This is why air
conditioners frequently require "slow-blow" fuses.  Floresent lights,
electronics, and even incendesent lamps also have a turn on surge but it
is usually not a problem.

As the "all lights on" button will only turn on the incandesent lights,
which are the least offender, I doubt you will have any problem.
Technical Details
Message-ID: <15779@oliveb.olivetti.com>
Path: arc1-ca.pugleaf.net!utzoo!mnetor!uunet!lll-winken!lll-lcc!pyramid!oliveb!jerry
References: <1010@uop.edu>

Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!mnetor!uunet!lll-winken!lll-lcc!pyramid!oliveb!jerry
From: jerry@oliveb.olivetti.com (Jerry Aguirre)
Newsgroups: sci.electronics
Subject: Re: x-10 questions
Message-ID: <15779@oliveb.olivetti.com>
Date: 23 Feb 88 20:55:25 GMT
References: <1010@uop.edu>
Reply-To: jerry@oliveb.UUCP (Jerry Aguirre)
Organization: Olivetti ATC; Cupertino, Ca
Lines: 22
Keywords: power surge