Article View: sci.electronics
Article #18724Re: Leadless chip carriers
From: Pat Chewning
Date: Mon, 29 Feb 1988 05:21
Date: Mon, 29 Feb 1988 05:21
20 lines
1270 bytes
1270 bytes
In article <411@imagine.PAWL.RPI.EDU>, night@pawl3.pawl.rpi.edu (Arthur L. Martin) writes: > Does anyone know where I can get a wirewrap socket for a 68 pin > leadless chip carrier? I know it's an oddball part, but I need > one. Or how about a reasonable way to fudge it? Any help would > be appreciated. I would suggest one from Augat or Advanced Interconnects. They are not really "sockets", but "adaptors". What you do is solder your LCC (leadless chip carrier) onto an adaptor that has circuits routed onto pins. Then you can use pin sockets on the board, or solder the pins directly into the board. AMP makes a real LCC socket, but the pins of the socket are short and round, not intended for wire wrapping. Pat Chewning NSC Portland Development Center 15201 NW Greenbriar Pkwy Beaverton, OR 97006
Technical Details
Message-ID:
<999@nscpdc.NSC.COM>Path:
arc1-ca.pugleaf.net!utzoo!mnetor!uunet!tektronix!reed!nscpdc!patchReferences:
<411@imagine.PAWL.RPI.EDU>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!mnetor!uunet!tektronix!reed!nscpdc!patch From: patch@nscpdc.NSC.COM (Pat Chewning) Newsgroups: sci.electronics Subject: Re: Leadless chip carriers Message-ID: <999@nscpdc.NSC.COM> Date: 29 Feb 88 05:21:16 GMT References: <411@imagine.PAWL.RPI.EDU> Distribution: na Organization: National Semiconductor, Portland Development Center, Portland, OR Lines: 20 Summary: Augat, Advanced Interconnects