Re: Pressure sensing

Article View: sci.electronics

Article #19077

#19077

From: John A. Deters
Date: Wed, 20 Apr 1988 01:40

10 lines
1005 bytes

A cheap* transducer can be made from the anti-static foam
that many CMOS chips come packed in.  If you are looking purely
for detection and not measurement, you might consider it.
It decreases in resistance with compression.

-- 
-john deters                     Dayton Hudson Department Store Company
uucp:  rutgers!dayton!jad        MIS 1060/700 on the Mall/Mpls, MN  55402
So many pedestrians ...          WARNING:  Do not leave these opinions
... so little time ...           lying around -- they attract flies.

Technical Details

Message-ID: <4738@dayton.UUCP>

Path:

arc1-ca.pugleaf.net!utzoo!mnetor!uunet!lll-winken!lll-tis!ames!pasteur!agate!ig!uwmcsd1!dogie!uwvax!umn-d-ub!umn-cs!dayton!jad

References: <1368@PT.CS.CMU.EDU> <1740@ritcsh.UUCP>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!mnetor!uunet!lll-winken!lll-tis!ames!pasteur!agate!ig!uwmcsd1!dogie!uwvax!umn-d-ub!umn-cs!dayton!jad
From: jad@dayton.UUCP (John A. Deters)
Newsgroups: sci.electronics
Subject: Re: Pressure sensing
Message-ID: <4738@dayton.UUCP>
Date: 20 Apr 88 01:40:00 GMT
References: <1368@PT.CS.CMU.EDU> <1740@ritcsh.UUCP>
Reply-To: jad@dayton.UUCP (John A. Deters)
Organization: Dayton-Hudson Dept. Store Co.
Lines: 9
Keywords: transducer, pressure, sensor, circuit

Reply to Parent Message