Article View: sci.electronics
Article #19141Re: X10 Questions
From: Alan Wu
Date: Fri, 13 May 1988 20:52
Date: Fri, 13 May 1988 20:52
10 lines
863 bytes
863 bytes
Easiest way to control low-voltage solenoid valves (6/12/24V) from X10 is to plug a small stepdown transformer into an X10 appliance module. What is needed is a small plug-in transformer (similar to those abandoned by the phone company when incandescent-lit phones get phased out) or purchasable from various parts stores. It's simple and safe. -- --Alan Wu Usenet: alw@mit-eddie / Internet: alw@eddie.mit.edu Telephone: (617) 253-5624
Technical Details
Message-ID:
<9197@eddie.MIT.EDU>Path:
arc1-ca.pugleaf.net!utzoo!attcan!uunet!husc6!bbn!mit-eddie!alwReferences:
<52412@sun.uucp>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!husc6!bbn!mit-eddie!alw From: alw@eddie.MIT.EDU (Alan Wu) Newsgroups: sci.electronics Subject: Re: X10 Questions Keywords: X10 modules low-voltage Message-ID: <9197@eddie.MIT.EDU> Date: 13 May 88 20:52:03 GMT References: <52412@sun.uucp> Reply-To: alw@eddie.MIT.EDU (Alan Wu) Followup-To: sci.electronics Organization: MIT, EE/CS Computer Facilities, Cambridge, MA Lines: 10