Article View: sci.electronics
Article #19210Re: Low-power TV transmission
From: Phil R. Karn
Date: Wed, 01 Jun 1988 18:52
Date: Wed, 01 Jun 1988 18:52
12 lines
902 bytes
902 bytes
> By the way, being on 436 should be little trouble to the weak signal > activity on 432.1. Except that it could be a lot of trouble to satellite users. The satellite segment on 70cm runs from 435 to 438 Mhz, and it is actively used for both uplinks and downlinks by several satellites. I find it interesting that certain ATV repeaters use channels that include the 435-438 Mhz segment, even though repeater operation there is prohibited by the rules. Phil
Technical Details
Message-ID:
<1114@thumper.bellcore.com>Path:
arc1-ca.pugleaf.net!utzoo!attcan!uunet!husc6!mailrus!rutgers!bellcore!faline!thumper!karnReferences:
<2693@tekcrl.TEK.COM> <17434@sri-unix.SRI.COM>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!husc6!mailrus!rutgers!bellcore!faline!thumper!karn From: karn@thumper.bellcore.com (Phil R. Karn) Newsgroups: sci.electronics,rec.ham-radio Subject: Re: Low-power TV transmission Summary: ATV frequency usage Message-ID: <1114@thumper.bellcore.com> Date: 1 Jun 88 18:52:45 GMT References: <2693@tekcrl.TEK.COM> <17434@sri-unix.SRI.COM> Organization: Bell Communications Research, Inc Lines: 12