🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: sci.electronics
Article #20237

Alkaline-cell capacities

#20237
From: commgrp
Date: Thu, 22 Dec 1988 22:13
69 lines
3260 bytes


A British friend sent information from the catalog of STC Electronic 
Services (a U.K. electronic-components supplier), listing capacities 
of Mallory Duracells (tm). This information seems difficult to obtain 
in the U.S.

Larry Lippman wrote in an article on rec.ham-radio (25 June 1988):

>...Leclanche cells (carbon-zinc) do not have "simple" ampere-hour 
>ratings; the effective ampere-hour rating depends upon the load 
>current, whether the load current is steady or intermittent, and the 
>actual time periods involved.  In addition, one must also define an 
>"end voltage" - which is MUCH more variable with Leclanche cells than 
>with any other type of cell...
                                                      
Methods for testing, including those endorsed by the U.S. National 
Bureau of Standards, are described in _Eveready Battery Applications 
Engineering Data_ published by Union Carbide Corporation.

Several sources say that alkaline D-cell capacity is 9-10 Amp-hours.  
Manufacturers have recently claimed a process improvement giving 30% 
more life. Test parameters for the data in the table below are not 
known. The relative capacities which I have calculated and listed in 
the last column should be valid within any type and manufacturer, 
considering load/time variations as discussed above.

                                         Capacity
Mallory                       Capacity   relative
part no.    Size     Volts     (mA-hr)   to D-cell
----------+-------+---------+-----------+---------
                                     
MN1300       D       1.5        15000       1.00
MN1400       C       1.5         7000       0.47    
MN1500       AA      1.5         2250       0.15
MN2400       AAA     1.5          800       0.05
MN9100       N       1.5          650       0.04
MN1203 (1)           4.5         4400       0.30
MN1604               9.0          500       0.03

Lantern batteries:

PC908 (2)    F       6          20000       1.33
PC915        F       6          20000
PC918 (3)            6          40000       2.67
PC926               12          20000


Notes:
-----

(1)  MN1203 is the 3-cell battery used in Petzl (tm) headlamps from 
     France (many of which were seen on helmets of rescue workers in 
     TV news coverage of the recent earthquake in Armenia). The cells 
     are larger than AA, smaller than C; they are not commonly 
     available in the U.S.  An adapter for the Petzl lamp holds three 
     AA-cells which, as shown above, have only about half as much 
     capacity.

(2)  PC908 has spring terminals, PC915 has screw terminals.

(3)  PC918 and PC926 are double-width lantern batteries containing 
     eight F-cells in parallel pairs, and in series, respectively.

--

Frank Reid     W9MKV
reid@gold.bacs.indiana.edu
Technical Details
Message-ID: <7200023@silver>
Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!husc6!mailrus!iuvax!silver!commgrp

Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!husc6!mailrus!iuvax!silver!commgrp
From: commgrp@silver.bacs.indiana.edu
Newsgroups: sci.electronics
Subject: Alkaline-cell capacities
Message-ID: <7200023@silver>
Date: 22 Dec 88 22:13:00 GMT
Organization: Indiana University CSCI, Bloomington
Lines: 69
Nf-ID: #N:silver:7200023:000:2801
Nf-From: silver.bacs.indiana.edu!commgrp    Dec 22 17:13:00 1988