🚀 go-pugleaf

In article <4584@mtgzy.att.com>, rlf@mtgzy.att.com (r.l.fletcher) writes:
> I am looking for pointers to a (low cost) ROM monitor program
> for an Intel 8051 processor. I dont need anything fancy but it
> should at least:
> 		1) handle power up reset
> 		2) Initialize an RS232 port
> 		3) display and modify registers and mem
> Break-pointing would be nice but is not a requirement. As always,
> source code is best but I'll take what I can get.

	While all of the above is easily to write from scratch (with some
help from the Intel MCS-51 Users Manual), everything you want to know
(including source code examples) should be contained in the manual for
the Intel SDK-51 System Design Kit, manual P/N 121588-001.  There is a
separate source code listing for the monitor eprom, but I don't see it
in our binder with the SDK-51 documentation.

	While the SDK-51 uses an onboard display and keypad for monitor
functions, it would be a lot simpler to use an external serial device.

<>  Larry Lippman @ Recognition Research Corp., Clarence, New York
<>  UUCP:  {allegra|ames|boulder|decvax|rutgers|watmath}!sunybcs!kitty!larry
<>  VOICE: 716/688-1231          {att|hplabs|mtune|utzoo|uunet}!/
<>  FAX:   716/741-9635 {G1,G2,G3 modes}   "Have you hugged your cat today?"