🚀 go-pugleaf

In article <2925@kitty.UUCP> larry@kitty.UUCP (Larry Lippman) writes:
>In article <1404@accelerator.eng.ohio-state.edu>, borgstrm@icarus.eng.ohio-state.edu (Tom Borgstrom) writes:
>> I'm trying to find a source of motorized valves for use in an residential
>> water system. The valves would be used to control hot and cold water to a
>> faucet or shower and thus can't be the solenoid type. I would like an
...
>Consider getting a hot/cold water control valve for a washing machine or
>dishwasher.
...
	Try a Water DAC:

If you wanted a variable temperature/pressure system, say 4 bits, you could use
a 1 to 4 Y manifold, 4 solenoid valves, each with its own pressure setting
manual valve or flow restrictor, and a 4 to 1 Y manifold combiner and make an
H20 D to A converter with 16 settings.
The manual valves/flow restrictors could be set for 1/2, 1/4, 1/8, and 1/16
of full pressure, and the solenoids could be driven via solid state relays for
a logic level interface.  You could use 4 bits for hot, and 4 for cold and
control the whole gizmo with one byte.  Some kind of temperature sensor would
be nice to complete the loop so that you could get better regulation.

 ^	Forrest Cook   (The preceding comments were my Opinions)	 ^
/|\	cook@stout.ucar.edu						/|\
/|\	{husc6 | rutgers | ames | gatech}!ncar!stout!cook		/|\
/|\	{uunet | ucbvax | allegra | cbosgd}!nbires!ncar!stout!cook	/|\