🚀 go-pugleaf

In article <1619@cveg.uucp> gmg@hcx.uucp (Greg M. Garner) writes:
>
>I have a Fisher RS-1035 stereo receiver that has a Tape input, aux input,
>and a phono input. I would like to hook my CD up to the phono input, but
>it doesn't work right. I assume that the phone level input is much 
>lower than the CD level input, along with having a different input
>impedance. Is there a circuit (like maybe a resistor divider network)
>that would let me hook up the cd? (I might settle for hooking up my 
>Amiga stereo audio outputs there, as it is not as high quality as the cd)
>
The inputlevel and the impedance isn't the only problem here.

In a phono-input of a receiver there is a so-called RIAA-filter,
which will tear-up your nice CD-music (damping the higher freq.).

My suggestion is to make a switch between your aux-signal and
your CD-signal, as they both have the same level and impedance AND
don't involve nasty filters.


-----------------------------------!--------------------------
Kind regards                       ! JUB TVJOJA MAJD
Morten Tolboel                     ! all you ruskies !
Institute for electronic systems   ! 
University of Aalborg              ! Mixnimoxboxfox
Denmark (not a suburb of Sweden!)  !
                                   !
Mail: i8d311v@aud.dk               !
  or  i8d311v@aud.uucp             !
  or  uunet!mcvax!dkuug!aud!i8d311v!
-----------------------------------!--------------------------