🚀 go-pugleaf

In article <593@oracle.UUCP>, sbulchan@oracle.uucp (Sanjay Bulchandani) writes:
> Would anyone have schematics of the X-10 power controllers (the ones available
> from Radio Shack, Sears, etc) ? I'd like to get them to work on 220-240v.
> 
> Any suggestions ?
> 
> Thanks, 
> 
> Sanjay
> 
> 
> -----------------------------------------------------------------------------
>    Sanjay A. Bulchandani    INTERNET:	sbulchan%oracle.com@apple.com
>                             UUCP    :	apple!oracle!sbulchan                

The CONTROLLERS just need 120VAC to operate which can be obtained
from either side of the 220VAC line. I am told that some people experience
difficulty in controlling modules that are on the other side of the 220
circuit (modules not on same side as controller).
Someone posted a note awhile back on how to bridge the signals
across from one side to the other, but I cant seem to find it now.

The MODULES are sold in a 220VAC variety but not by Sears
or RS. Heathkit, Fordham Radio and Leviton all offer 220VAC modules.
They are around $30 and control up to 20 amps. Leviton (electrical suppliers)
have a large menu of "specialty items" for use with the BSR X10 system
but they are high priced.
If you need addresses for the above, email me and I will send them.

As far as schematics go, you can probably get them from RS if you
order their Service Manuals for each of the devices you are 
interested in.


					Ron Fletcher
					AT&T Bell Laboratories
					Middletown NJ
					att!mtuxo!mtgzy!rlf