RE: X-10

Article View: sci.electronics

Article #20743

#20743

From: mitchell
Date: Mon, 13 Feb 1989 14:31

15 lines
1139 bytes

If you are having a problem with X-10 modules working on the other leg of
a 120/240 volt system than the controller, Leviton makes a signal bridge
module that you connect across both legs to provide adequate signal
strength on both of them.  You should be able to get it through a local
electrical supply house that is a Leviton distributor (although they
may have to order it for you).

SAFETY NOTE:  When installing this beastie, OBSERVE ALL SAFETY PRECAUTIONS.
TURN OFF THE MAIN SWITCH OR BREAKER FIRST!  and make sure ALL the instructions
are followed.  You are dealing with potentially LETHAL voltage and power
levels here!   If you don't feel particularly comfortable working with
this - HIRE A PROFESSIONAL ELECTRICIAN to install it for you!

Regards,
Bill Mitchell

Technical Details

Message-ID: <807@mruxb.UUCP>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucbvax!decwrl!labrea!rutgers!bellcore!faline!thumper!gamma!pyuxp!mruxb!wjm

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucbvax!decwrl!labrea!rutgers!bellcore!faline!thumper!gamma!pyuxp!mruxb!wjm
From: wjm@mruxb.UUCP (mitchell)
Newsgroups: sci.electronics
Subject: RE: X-10
Keywords: 240 v Bridge
Message-ID: <807@mruxb.UUCP>
Date: 13 Feb 89 14:31:27 GMT
Organization: Bellcore
Lines: 15