Article View: sci.electronics
Article #20858grounding (was Re: 60 Hz hum filter)
From: Bill Davidson
Date: Wed, 22 Feb 1989 23:08
Date: Wed, 22 Feb 1989 23:08
19 lines
1417 bytes
1417 bytes
In article <9143@ihlpl.ATT.COM> nmju@ihlpl.UUCP (55244-Urban,M.J.) writes:
...
>Ihor, I think you have a grounding problem. These are probably the
>hardest types of system level audio problems to solve. All I can
>suggest is that you try a lot of different connections until you
>find one that works. The fact that the MIC input is noise free is
...
>Mike Urban
I have a related question. Why don't audio components (and video
too for that matter) use grounded plugs? It seems like such a
simple thing to do yet I've never seen any audio equipment that
used them. My reciever-amp has a ground connection for the antenna
(which is hooked up) but I'm not sure this is the same. Even if
it is, it couldn't do anything for the rest of the components.
--Bill Davidson
--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
....!{ucsd|sdcsvax}!celerity!billd
Technical Details
Message-ID:
<258@celerity.UUCP>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucbvax!decwrl!sun!pitstop!sundc!seismo!esosun!cogen!celerity!billdReferences:
<2313@rayssdb.ray.com> <9143@ihlpl.ATT.COM>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucbvax!decwrl!sun!pitstop!sundc!seismo!esosun!cogen!celerity!billd From: billd@celerity.UUCP (Bill Davidson) Newsgroups: sci.electronics,rec.audio,rec.ham-radio Subject: grounding (was Re: 60 Hz hum filter) Message-ID: <258@celerity.UUCP> Date: 22 Feb 89 23:08:04 GMT References: <2313@rayssdb.ray.com> <9143@ihlpl.ATT.COM> Reply-To: billd@celerity.UUCP (Bill Davidson) Organization: FPS Computing, San Diego CA Lines: 19