Article View: sci.electronics
Article #20866Re: nasty fluorocarbons
From: Hubert D.
Date: Fri, 24 Feb 1989 00:00
Date: Fri, 24 Feb 1989 00:00
13 lines
1105 bytes
1105 bytes
This is a problem. The cleaning of large areas of PC board real estate is best done with fluorocarbons. However, plain old isopropal alchohol will work fine if you don't mind doing a little scrubing. We design and build oneses and twosies so the scrubbing is not too laborious. The best scrubber is an acid brush which has been cut down to 1/2 inch of bristles (they come with an inch of bristles). The acid brush is a very cheap item available at any plumbing supply store for about a nickel apiece. They are made to be used for applying flux to copper pipe before soldiering. Hubert Daugherty hd@rice
Technical Details
Message-ID:
<2678@kalliope.rice.edu>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!rice!kappa!hdReferences:
<24497@amdcad.AMD.COM> <1989Feb18.234109.3779@utzoo.uucp>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!rice!kappa!hd From: hd@kappa.rice.edu (Hubert D.) Newsgroups: sci.electronics Subject: Re: nasty fluorocarbons Summary: What we do in the EE shop at Rice Message-ID: <2678@kalliope.rice.edu> Date: 24 Feb 89 00:00:13 GMT References: <24497@amdcad.AMD.COM> <1989Feb18.234109.3779@utzoo.uucp> Sender: usenet@rice.edu Reply-To: hd@rice.edu (Hubert D.) Organization: Rice University, Houston Lines: 13