Re: remote cable cntrls

Article View: sci.electronics

Article #21479

#21479

From: Pat Berry
Date: Wed, 24 May 1989 16:04

11 lines
917 bytes

In article <706@xroads.UUCP>, wiz@xroads.UUCP (Mike Carter) writes:
> 
> No. In regards to volume control using CABLE BOXES..you must realize that the
> TV must DECODE the audio from the composite signal comming from the cable
> box....in much the same way synch is.
> Volume is a factor produced at the amplifier of your T.V>. 
> You should concentrate on controlling the volume at your SET rather than at
> the cable box. 

Gee, someone should tell our cable company... all their converter boxes
have remote volume adjust.

Technical Details

Message-ID: <130@swituc.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!rutgers!sun-barr!cs.utexas.edu!uunet!swituc!pmb

References: <1893@ektools.UUCP> <706@xroads.UUCP>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!rutgers!sun-barr!cs.utexas.edu!uunet!swituc!pmb
From: pmb@swituc.UUCP (Pat Berry)
Newsgroups: sci.electronics
Subject: Re: remote cable cntrls
Summary: Cable converter volume control
Message-ID: <130@swituc.UUCP>
Date: 24 May 89 16:04:49 GMT
References: <1893@ektools.UUCP> <706@xroads.UUCP>
Distribution: usa
Lines: 11

Reply to Parent Message