MicroMint Text to Speech Board

Article View: sci.electronics

Article #21508

#21508

From: jds
Date: Sat, 27 May 1989 21:08

17 lines
1020 bytes


  I just picked up a MicroMint Text to Speech board.  Alas it came with no
documentation (no big surprise eh?).  Well, i figure someone out there must
have some!  What I need to do is set it up for serial operation.  It was
previously with the parallel interface.  There is an 8 position dip switch
that probably configures the board.

thanks in advance,

-- john


John Sutter, Mass. Microelectronics Center (M2C)
(w)  75 North Drive, Westborough, MA  01581, USA +1 (508) 870-0312
(h)  516 Dutton Rd., Sudbury, MA  01776, USA     +1 (508) 443-0515
UUCP: harvard!m2c!jds    INTERNET:   jds@m2c.org         NSS 29355

Technical Details

Message-ID: <4925@m2c.M2C.ORG>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ames!think!husc6!m2c!m2c.m2c.org!jds

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ames!think!husc6!m2c!m2c.m2c.org!jds
From: jds@m2c.m2c.org (jds)
Newsgroups: sci.electronics
Subject: MicroMint Text to Speech Board
Message-ID: <4925@m2c.M2C.ORG>
Date: 27 May 89 21:08:41 GMT
Sender: jds@m2c.ORG
Reply-To: jds@m2c.m2c.org (jds)
Organization: Massachusetts Microelectronic Center, Westboro, Mass.
Lines: 17