🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: sci.electronics
Article #21612

Re: TV RF transmitter wanted

#21612
From: Thomas Lapp
Date: Sat, 03 Jun 1989 16:12
17 lines
1255 bytes
> sending unit (sorry, no around-the-corner operation :-).  Don't forget
> to be sure that the polarization of the two antennae are the same (both
> vertical or both horizontal).  Whatever the VCR is tuned to, or what

I'd tend to make the polorization vertical, since most regular (legal)
signals are horizontally polorized.

Same disclaimer below applies to this response:
> And now for the real DISCLAIMER:
> I've never done this myself and probably would look for an alternative
> (read legal) method if I wanted to extend my tv signal.

                         - tom
==============================================================================
uucp:     ...!udel!mvac23!thomas    ! Internet: mvac23!thomas@udel.edu
Location: Newark, DE, USA           !      or   mvac23%thomas@udel.edu
==============================================================================
Technical Details
Message-ID: <35.UUL1.3#5131@mvac23.UUCP>
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!rochester!udel!mvac23!thomas
References: <107726@sun.Eng.Sun.COM>

Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!rochester!udel!mvac23!thomas
From: thomas@mvac23.UUCP (Thomas Lapp)
Newsgroups: sci.electronics
Subject: Re: TV RF transmitter wanted
Message-ID: <35.UUL1.3#5131@mvac23.UUCP>
Date: 3 Jun 89 16:12:59 GMT
References: <107726@sun.Eng.Sun.COM>
Reply-To: mvac23!thomas@udel.edu
Organization: TL**2
Lines: 17