Article View: sci.electronics
Article #21651Re: HIGH VOLTAGE STUN GUNS'S
From: Rick Francis Golembiewski
Date: Tue, 06 Jun 1989 20:29
Date: Tue, 06 Jun 1989 20:29
18 lines
1561 bytes
1561 bytes
>wishing I get to the bottom of my reason for posting this. Ok here it goes. >I have the schematics to build a stun gun that delivers 75,000 volts at >25,000 watts from an input of 9.8 volts DC. Now my question is, Is there any >way I can conect two of these stun guns in SERIES and get _________ ??? Humm... if you are drawing 25Kw from a 9.8v DC source then you're going to have to draw 2550 AMPS from your initilal power source! Now that's a heafty supply! Seriously I don't think you're actually going to be able to build such a beast (and if you do, you'll probabily need a truck to move it, unless that 25Kw is a few orders of magnitude off..). I'de advise against trying because high voltage can be deadly, especially when you don't have experience working with Hv, read some of the HV Cap. articles to get an idea. // Rick Golembiewski rg20+@andrew.cmu.edu \\ \\ #include stddisclaimer.h // \\ "I never respected a man who could spell" // \\ -M. Twain //
Technical Details
Message-ID:
<0YX3EGy00Wg9IE8kVC@andrew.cmu.edu>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!mit-eddie!uw-beaver!cornell!rochester!pt.cs.cmu.edu!andrew.cmu.edu!rg20+References:
<426@aucis.UUCP>, <10ramcte01@ULKYVX.bitnet>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!mit-eddie!uw-beaver!cornell!rochester!pt.cs.cmu.edu!andrew.cmu.edu!rg20+ From: rg20+@andrew.cmu.edu (Rick Francis Golembiewski) Newsgroups: sci.electronics Subject: Re: HIGH VOLTAGE STUN GUNS'S Message-ID: <0YX3EGy00Wg9IE8kVC@andrew.cmu.edu> Date: 6 Jun 89 20:29:06 GMT References: <426@aucis.UUCP>, <10ramcte01@ULKYVX.bitnet> Organization: Class of '92, Carnegie Mellon, Pittsburgh, PA Lines: 18 In-Reply-To: <10ramcte01@ULKYVX.bitnet>