Article View: sci.electronics
Article #21678Re: HIGH VOLTAGE STUN GUNS'S
From: Mark Zenier
Date: Wed, 07 Jun 1989 21:42
Date: Wed, 07 Jun 1989 21:42
13 lines
1151 bytes
1151 bytes
In article <426@aucis.UUCP>, jchan@aucis.UUCP (Jimmy Chanaga) writes:
> I have the schematics to build a stun gun that delivers 75,000 volts at
> 25,000 watts from an input of 9.8 volts DC. Now my question is, Is there any
> way I can conect two of these stun guns in SERIES and get _________ ???
25 Kw, but for how long. If you hook two of them in series, you'll
probably just get two 75 Kv pulses instead of one. Sounds like a good
way to puncture insulation but not much else. Build a Telsa coil,
they're all sorts of fun. Pick the right resonant frequency and you
get to talk to both the FCC and the Coast Guard. In person. ;-)
Mark Zenier uunet!nwnexus!pilchuck!ssc!markz markz@ssc.uucp
uunet!amc!
Technical Details
Message-ID:
<1944@ssc.UUCP>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!cs.utexas.edu!uunet!pilchuck!ssc!markzReferences:
<426@aucis.UUCP>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!cs.utexas.edu!uunet!pilchuck!ssc!markz From: markz@ssc.UUCP (Mark Zenier) Newsgroups: sci.electronics Subject: Re: HIGH VOLTAGE STUN GUNS'S Keywords: HIGH VOLTAGE, STUN GUNS Message-ID: <1944@ssc.UUCP> Date: 7 Jun 89 21:42:32 GMT References: <426@aucis.UUCP> Organization: SSC, Inc., Seattle, WA Lines: 13