🚀 go-pugleaf

    Thank you to the gentleman who sent me the necessary pinout info
for the 80287.  I connected pin 39 (clock multiplier) to 5V and that did
it, actually over did it.  The 287 is now running at 12MHz, a little over
the 10Mhz the chip is rated for and above the CPU's 10Mhz.

    Is running the 287 above its rated speed harmful or dangerous?  I know
that the chip will probably heat up more, but will it affect anything else
in the computer?  I do have a heat sink that I can put on the chip to help
cool it, but I don't how to attach the heat sink.  Is there a readily
available heat-conductive glue that I can use for this job?

    Replies to the above questions will be appreciated.

Dzung Hoang
-- 
-----------------------------------------------------------------------------
hoang@comus.cs.tulane.edu                   hoang@rex.cs.tulane.edu
hoang@comus.UUCP                            hoang@rex.UUCP
tulane!comus!hoang                          tulane!rex!hoang
-----------------------------------------------------------------------------