Re: Varo H477 HV Diode

Article View: sci.electronics

Article #21885

#21885

From: Mark Robert Thorson
Date: Tue, 26 Dec 1989 00:00

7 lines
872 bytes

To answer the second part of your question, the diode will have a fairly
large diode drop across it.  A typical HV rectifier for a modern TV set
is a pencil diode mounted on the flyback.  A pencil diode is a ceramic
tube with a long stack of little discs in it.  Each disk is an individual
diode.  I would guess that a typical modern multimeter would measure
resistence with a voltage below the diode drop of your HV
rectifier, so you would get high resistence in both directions.

Technical Details

Message-ID: <25369@cup.portal.com>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!wuarchive!zaphod.mps.ohio-state.edu!mips!apple!fox!portal!cup.portal.com!mmm

References: <117@dalek.UUCP>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!wuarchive!zaphod.mps.ohio-state.edu!mips!apple!fox!portal!cup.portal.com!mmm
From: mmm@cup.portal.com (Mark Robert Thorson)
Newsgroups: sci.electronics
Subject: Re: Varo H477 HV Diode
Message-ID: <25369@cup.portal.com>
Date: 26 Dec 89 00:00:42 GMT
References: <117@dalek.UUCP>
Organization: The Portal System (TM)
Lines: 7

Reply to Parent Message