Re: Using MC1488 for TTL->RS-232

Article View: sci.electronics

Article #22017

#22017

From: Mark Zenier
Date: Fri, 05 Jan 1990 19:09

7 lines
758 bytes

In article <7041@cbnewsh.ATT.COM>, aaron@cbnewsh.ATT.COM (aaron.michael.chesir) writes:
> Your problem is that the MC1488 takes +- 12 (TWELVE) Volts, not +-5V.

Actually, Motorola says the chip will work down to +7, -2.5 volts, but +/- 6
seemed to work fine.

markz@ssc.uucp

Technical Details

Message-ID: <357@ssc.UUCP>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!clyde.concordia.ca!mcgill-vision!bloom-beacon!snorkelwacker!tut.cis.ohio-state.edu!mailrus!cornell!uw-beaver!uw-entropy!dataio!pilchuck!ssc!markz

References: <MZb4w2600WB88M=4wv@andrew.cmu.edu> <7041@cbnewsh.ATT.COM>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!clyde.concordia.ca!mcgill-vision!bloom-beacon!snorkelwacker!tut.cis.ohio-state.edu!mailrus!cornell!uw-beaver!uw-entropy!dataio!pilchuck!ssc!markz
From: markz@ssc.UUCP (Mark Zenier)
Newsgroups: sci.electronics
Subject: Re: Using MC1488 for TTL->RS-232
Message-ID: <357@ssc.UUCP>
Date: 5 Jan 90 19:09:47 GMT
References: <MZb4w2600WB88M=4wv@andrew.cmu.edu> <7041@cbnewsh.ATT.COM>
Organization: SSC, Inc., Seattle, WA
Lines: 7

Reply to Parent Message