Re: Resistor types

Article View: sci.electronics

Article #22063

#22063

From: Brian Reese
Date: Thu, 18 Jan 1990 16:58

18 lines
1432 bytes

In article <1990Jan15.042813.15689@ux1.cso.uiuc.edu> forbes@aries.scs.uiuc.edu (Jeff Forbes) writes:
>Non-inductive film resistors are available. I believe that a zig-zag pattern 
>is prepared on a plastic film then attached to a body for support and heat
>sink. I believe that they are only available in larger power sizes, which
>is where wire wound is mostly used.

Non-inductive (actually super low-inductive) wire wound resistors are also 
available.  The wire is wrapped clockwise in one direction, then counter-
clockwise in the other direction in an effort to cancel the inductive effect. 
(Dale calls this an Aryton-Perry winding)

Brian

-- 
Brian Reese                           uw-beaver!pilchuck!seahcx!phred!brianr
Physio Control Corp., Redmond, Wa.                         brianr@phred.UUCP
"Sticks and stones may break my bones, but whips and chains excite me!"
All opinions are manf. suggested and are subject to change without notice.

Technical Details

Message-ID: <2943@phred.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!clyde.concordia.ca!uunet!pilchuck!seahcx!phred!brianr

References: <231715@<1990Jan12> <21000055@m.cs.uiuc.edu> <1990Jan15.042813.15689@ux1.cso.uiuc.edu>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!clyde.concordia.ca!uunet!pilchuck!seahcx!phred!brianr
From: brianr@phred.UUCP (Brian Reese)
Newsgroups: sci.electronics
Subject: Re: Resistor types
Message-ID: <2943@phred.UUCP>
Date: 18 Jan 90 16:58:55 GMT
References: <231715@<1990Jan12> <21000055@m.cs.uiuc.edu> <1990Jan15.042813.15689@ux1.cso.uiuc.edu>
Reply-To: brianr@phred.UUCP (Brian Reese)
Organization: Physio Control Corp., Redmond, Wa.
Lines: 18

Reply to Parent Message