Article View: sci.electronics
Article #22073Re: PAL's vs gates
From: chuck
Date: Tue, 30 Jan 1990 01:46
Date: Tue, 30 Jan 1990 01:46
16 lines
1116 bytes
1116 bytes
-Message-Text-Follows-
In article <358@poppy.warwick.ac.uk>, phupp@warwick.ac.uk (S Millington) writes...
>
I too am a budding pal user. Most of my designs require low cost and
low power. I note that the standard PALs are available from JDR for
$2.50-$5.00, which is in my range. But these chew up 30-50ma. Are there
any fully static cmos chips available? I.e. << 1ma when not switching?
Any that are cheap and readily available?
Particularly nice would be one that could handle demultiplexing a bus
and decoding simultaneously (standard 8 bit data/address). This would require
a lot of pins, say 12 input and 12 output, but hey, why not ask for the moon?
Chuck Parsons
CHUCK@MITLNS.MIT.EDU
Technical Details
Message-ID:
<1990Jan29.225838.2711@athena.mit.edu>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!umich!samsung!cs.utexas.edu!usc!snorkelwacker!bloom-beacon!newsShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!umich!samsung!cs.utexas.edu!usc!snorkelwacker!bloom-beacon!news From: chuck@mitlns.mit.edu Newsgroups: sci.electronics Subject: Re: PAL's vs gates Message-ID: <1990Jan29.225838.2711@athena.mit.edu> Date: 30 Jan 90 01:46:53 GMT Sender: news@athena.mit.edu (News system) Organization: M.I.T. Lab for Nuclear Science Lines: 15