NTSC signals thanks to all.

Article View: sci.electronics

Article #22421

#22421

From: Jim Stewart
Date: Mon, 26 Feb 1990 20:00

12 lines
689 bytes

Thanks to all the responses.  It turned out that the colour
burst was way off frequency.  So far in fact, that I had to
pad the crystal with a small capacitor--the adjustment capacitor
on the mother board could not bring it back to the right
frequency.  I don't have a frequency counter, so I tuned around
my Kenwood until I found the 14... signal and worked from there.

tnx again
-- 
Jim Stewart, VE3SRJ
UUCP:  jim%ghp@mnetor.uucp
BELL:  (416)862-0430

Technical Details

Message-ID: <511@ghp.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!mnetor!ghp!jim

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!mnetor!ghp!jim
From: jim@ghp.UUCP (Jim Stewart)
Newsgroups: sci.electronics
Subject: NTSC signals thanks to all.
Keywords: NTSC Colour
Message-ID: <511@ghp.UUCP>
Date: 26 Feb 90 20:00:42 GMT
Lines: 12