🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: sci.electronics
Article #22489

Need Microcontroller Chip

#22489
From: John Moore
Date: Thu, 01 Mar 1990 21:37
20 lines
1165 bytes
I am looking for a microcomputer chip with the following characteristics.
If you know of such a beast, please email.
  (1) On board EPROM or EEPROM, or built in piggyback socket for same,
      of at least 4K Bytes - preferrably 8K.
  (2) On board RAM of at least 256 Bytes.
  (3) Built in multiply and divide - preferrably 16 bit.
  (4) 16 bit accumulator and math.
  (5) On-chip A/D - at least 8 bits, at most 40uSec conversion time,
      with Sample and Hold. This is optional but desirable.
  (6) Price less than $30.00 in small quantities
  (7) On chip interrupting timer - programmable interval.


Thanks...

-- 
John Moore (NJ7E)           mcdphx!anasaz!john asuvax!anasaz!john
(602) 951-9326 (day or eve) long palladium, short petroleum
7525 Clearwater Pkwy, Scottsdale, AZ 85253
Support ALL of the bill of rights, INCLUDING the 2nd amendment!
Technical Details
Message-ID: <1365@anasaz.UUCP>
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!asuvax!anasaz!john

Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!asuvax!anasaz!john
From: john@anasaz.UUCP (John Moore)
Newsgroups: sci.electronics
Subject: Need Microcontroller Chip
Message-ID: <1365@anasaz.UUCP>
Date: 1 Mar 90 21:37:17 GMT
Organization: Anasazi Inc., Phoenix AZ
Lines: 20