Article View: sci.electronics
Article #28501/4" connector question
From: Scott Hanson
Date: Mon, 13 Apr 1992 22:04
Date: Mon, 13 Apr 1992 22:04
12 lines
955 bytes
955 bytes
I recently acquired a quantity of 1/4" plugs. They are all metal, and impossible to open nondestructively. Close inspection reveals a tiny pin inside (where the signal would be) and a strange cutting screw (which would cut through the insulation and contact the shield). I have had little luck getting these to work. They seem to be solderless connectors designed to be quick and easy (and unreliable) I would like any suggestions on how these were designed to work. Thank you in advance. ------------------------------ dcd@qed.cts.com (Scott Hanson) or qed!dcd The QED BBS -- (310)420-9327
Technical Details
Message-ID:
<eHw7iB2w164w@qed.cts.com>Path:
arc1-ca.pugleaf.net!sparky!uunet!cs.utexas.edu!asuvax!ncar!noao!arizona!arizona.edu!cerritos.edu!wilbur!qed!dcdShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!sparky!uunet!cs.utexas.edu!asuvax!ncar!noao!arizona!arizona.edu!cerritos.edu!wilbur!qed!dcd From: dcd@qed.cts.com (Scott Hanson) Newsgroups: sci.electronics Subject: 1/4" connector question Message-ID: <eHw7iB2w164w@qed.cts.com> Date: 13 Apr 92 22:04:01 GMT Sender: bbs@qed.UUCP Organization: The QED BBS, Lakewood CA Lines: 12