Info on iron-on PCBs??

Article View: sci.electronics

Article #2918

#2918

From: Jeff Lindstrom
Date: Mon, 13 Apr 1992 11:13

42 lines
1426 bytes

AP>I missed saving the fairly recent thread on iron-on PCBs, and now I
AP>need the data. Could someone email me on this please?
AP>    - Andrew Palfreyman

  Amazing timing.  I just learned about this last week.

The distributor's name and address is:

     Meadowlake Corp.
     (516)757-3385
     25 Blanchard Dr.
     Northport, NY  11768

The product is:  Tec-200 film

It is a clear acetate and comes as 10 8"x10" sheets for $7.50.

Generate your 1X artwork and put it through the copier with the
 acetate in the paper tray.

Clean the PCB with 600 grit sandpaper or soapless steel wool
  or use denatured aclohol to clean the soap from a soapy steel
  wool pad.

Slap on PCB and use a thin cloth between the iron and acetate

Set the iron for 270-280 Fahrenheit (Cotton)

Iron for 2-2.5 minutes

Let cool and peel off film.

The PCB is now ready to etch with Ferric Chloride.

___
     Amig

--  

Jeff Lindstrom
Internet: Jeff.Lindstrom@ofa123.fidonet.org
Compuserve: >internet:Jeff.Lindstrom@ofa123.fidonet.org

Technical Details

Message-ID: <9841.29EBEDDC@ofa123.fidonet.org>

Path: arc1-ca.pugleaf.net!sparky!uunet!elroy.jpl.nasa.gov!news.claremont.edu!ucivax!ofa123!Jeff.Lindstrom

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!sparky!uunet!elroy.jpl.nasa.gov!news.claremont.edu!ucivax!ofa123!Jeff.Lindstrom
From: Jeff.Lindstrom@ofa123.fidonet.org (Jeff Lindstrom)
Newsgroups: sci.electronics
Subject: Info on iron-on PCBs??
Message-ID: <9841.29EBEDDC@ofa123.fidonet.org>
Date: Mon, 13 Apr 92 04:13:04 PDT
Organization: Universal Electronics Inc. (Public access BBS)
Lines: 42