Article View: sci.electronics
Article #3032buffer amp
From: James P. Kiely
Date: Tue, 12 Sep 1989 15:42
Date: Tue, 12 Sep 1989 15:42
19 lines
1625 bytes
1625 bytes
I am looking for an IC or circuit with the following characteristics:
- high impedance single ended input ( >= 1 Gigohm )
(differential with one input grounded should be ok)
- low impedance balanced output ( <= 50 ohms) (to drive twisted pair)
- SNR of at least 98 db
- equivalent input noise <= 0.05 microvolts
- gain of 1
- high frequency cutoff 10 KHz or higher
- any other spec's necessary to make the circuit usable as a front
end to a true 16 bit data acquisition system
I would like this all in one inexpensive IC if possible.
If not a simple inexpensive circuit will do.
Application - EEG (electroencephalogram - brain waves) amplifier.
=============================================================================
NAME: James P. Kiely USPS: Kiely Laboratories
USENET: ...!harvard!lownlab!kiely P.O. Box 624
DOMAIN: kiely@lownlab.harvard.edu Allston, MA 02134-0624
PHONE: +1 617 782 4136 USA
Technical Details
Message-ID:
<2596@husc6.harvard.edu>Path:
arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!wuarchive!gem.mps.ohio-state.edu!ginosko!uunet!husc6!lownlab!kielyShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!wuarchive!gem.mps.ohio-state.edu!ginosko!uunet!husc6!lownlab!kiely From: kiely@lownlab.harvard.edu (James P. Kiely) Newsgroups: sci.electronics Subject: buffer amp Summary: need hi-zi single ended --> low-z balanced buffer amp Keywords: buffer impedance Message-ID: <2596@husc6.harvard.edu> Date: 12 Sep 89 15:42:57 GMT Sender: news@husc6.harvard.edu Reply-To: kiely@lownlab.harvard.edu (James P. Kiely) Organization: Lown Cardiovascular Laboratory, Harvard University Lines: 19