Article View: sci.electronics
Article #3037Re: Info on designing IBM PC/AT compatible board needed
From: Gordon Letwin
Date: Wed, 13 Sep 1989 00:21
Date: Wed, 13 Sep 1989 00:21
18 lines
1351 bytes
1351 bytes
In article <4053@ct.sei.cmu.edu>, tac@sei.cmu.edu (Timothy Coddington) writes: > > I'm looking for some information on the IBM AT bus. I need a > source/reference on the closest thing to a bus spec. In > particular, if someone has any application notes on building IBM AT > compatible boards that would be great! I have a book called "Interfacing to the IBM Personal Computer" by Lewis Eggebrecht, published by Howard W. Sams (Indianapolis, IN), $16.95. It has chapters on the microprocessor, bus cycles, system bus signal descriptions, timings, mechanical and power specs, DMA, high speed transfer, etc. I've found it quite helpful; it has "typical" circuits, as well. Sams books are widely available; I got mine at a local computer store. I'm sure you could mail order from Indianapolis, worst case. Gordon Letwin
Technical Details
Message-ID:
<7683@microsoft.UUCP>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!gem.mps.ohio-state.edu!ginosko!uunet!microsoft!gordonlReferences:
<4053@ct.sei.cmu.edu>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!gem.mps.ohio-state.edu!ginosko!uunet!microsoft!gordonl From: gordonl@microsoft.UUCP (Gordon Letwin) Newsgroups: sci.electronics Subject: Re: Info on designing IBM PC/AT compatible board needed Summary: Interfacing Book Keywords: IBM PC/AT,bus spec,board design Message-ID: <7683@microsoft.UUCP> Date: 13 Sep 89 00:21:20 GMT References: <4053@ct.sei.cmu.edu> Organization: Microsoft Corp., Redmond WA Lines: 18