Article View: sci.electronics
Article #3166Re: existance of flat speaker material
From: rosso Ross Oliver x537 ionesco
Date: Fri, 22 Sep 1989 06:36
Date: Fri, 22 Sep 1989 06:36
26 lines
1513 bytes
1513 bytes
In article <2740@phred.UUCP> johng@phred.UUCP (yo!john) writes: >A friend attended an electonics trade show last year and was telling me about >a demo that used this flat plastic material to play music through. He >said the material was 2"x3"x0.1". Does anyone know > *what this material is > *what it takes to drive > *who makes it > *cost The August issue of Modern Electronics had an article about piezoelectric plastic film. This stuff has some amazing properties. It produces a slight current when flexed, and will flex when an external current is applied. Thus, it can be used as a speaker or a microphone, or both. This kind of material is used to make the sound elements used in digital watches, small clocks, and PC card modems. These small sound disks are available from electronic mail order supply houses such as DigiKey. The supplier listed in the Modern Electronics article is the Kynar Piezo Film Department of the Pennwalt Corp., PO Box 799, Valley Forge, PA 19482. A variety of demonstration kits are available from Kynar, although the article did not give any prices. Ross Oliver rosso@sco.com
Technical Details
Message-ID:
<6043@viscous.sco.COM>Path:
arc1-ca.pugleaf.net!utzoo!attcan!uunet!sco!rossoReferences:
<2740@phred.UUCP>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!sco!rosso From: rosso (Ross Oliver, x537, ionesco) Newsgroups: sci.electronics Subject: Re: existance of flat speaker material Message-ID: <6043@viscous.sco.COM> Date: 22 Sep 89 06:36:19 GMT References: <2740@phred.UUCP> Sender: news@sco.COM Reply-To: rosso@sco.com (Ross Oliver) Organization: SCO Technical Support Lines: 26