Article View: sci.electronics
Article #3483single board RISCs
From: Bruce Davie
Date: Mon, 23 Oct 1989 19:08
Date: Mon, 23 Oct 1989 19:08
15 lines
1054 bytes
1054 bytes
I'm looking for a single-board RISC (I don't particularly care what flavour) product which meets the following criteria: It should have a few Mbytes of on-board memory with two high-speed ports leading off the board. One of these should (probably) be a VMEbus connection, which should be capable of supporting data transfer at the full VME rate of 40 Mbytes/sec. The other should be something which is sufficiently well specified that I can design an interface to it, e.g. it could be a VSB or VMX bus. Does anyone know of something like this? Bruce Davie Bell Communications Research Morriston, NJ, USA
Technical Details
Message-ID:
<2320@faline.bellcore.com>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!utstat!jarvis.csri.toronto.edu!mailrus!wuarchive!gem.mps.ohio-state.edu!ginosko!shadooby!sharkey!cfctech!teemc!mibte!gamma!thumper!faline!bsdShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!utstat!jarvis.csri.toronto.edu!mailrus!wuarchive!gem.mps.ohio-state.edu!ginosko!shadooby!sharkey!cfctech!teemc!mibte!gamma!thumper!faline!bsd From: bsd@faline.bellcore.com (Bruce Davie) Newsgroups: sci.electronics,comp.sys.mips Subject: single board RISCs Keywords: RISC buses VME Message-ID: <2320@faline.bellcore.com> Date: 23 Oct 89 19:08:33 GMT Organization: Bell Communications Research Lines: 15