Article View: sci.electronics
Article #356Re: Computer monitor resolution question
From: Andrew Dyer
Date: Mon, 02 Nov 1992 20:08
Date: Mon, 02 Nov 1992 20:08
13 lines
1032 bytes
1032 bytes
The manufacturers I know of DO match tube dot pitch and amplifier bandwidth to some degree. If they are making a lower-resolution monitor, in general they will use the largest dot-pitch tube they can, as the larger the dot pitch, the easier the tube is to manufacture, and the cheaper it is. One other bit of trivia, how the dot pitch number is calculated is different from tube vendor to tube vendor. (so not all .25 .28 or .31 dot pitch tubes are the same) -- Andrew Dyer - Pagine Corp. - 1961-A Concourse Dr. San Jose, CA 95131 Zippy says: I'm having an emotional outburst!!
Technical Details
Message-ID:
<1992Nov2.200856.10677@pagine.com>Path:
arc1-ca.pugleaf.net!sparky!uunet!pagine!adyerReferences:
<1992Oct23.173017.16811@athena.cs.uga.edu> <1992Oct28.173018.23271@inmos.co.uk> <1992Oct28.182728.25205@athena.cs.uga.edu>Show Full Headers
Complete Article Headers
Newsgroups: sci.electronics Path: arc1-ca.pugleaf.net!sparky!uunet!pagine!adyer From: adyer@pagine.com (Andrew Dyer) Subject: Re: Computer monitor resolution question Message-ID: <1992Nov2.200856.10677@pagine.com> Organization: Pagine Corporation, San Jose, CA, USA References: <1992Oct23.173017.16811@athena.cs.uga.edu> <1992Oct28.173018.23271@inmos.co.uk> <1992Oct28.182728.25205@athena.cs.uga.edu> Date: Mon, 2 Nov 1992 20:08:56 GMT Lines: 13