Re: two video questions

Article View: sci.electronics

Article #3660

#3660

From: Quentin_Conner
Date: Thu, 09 Nov 1989 14:35

15 lines
1033 bytes

Speaking of video questions:

How would one test out some arbitrary television transmission facility,
for instance a cable company's video distribution system or a broadcast
transmitter/receiver pair.  Would you perform a frequency response check
and then measure the received power of some known complex signal?  Does
any automated equipment exist that a technician could use in the field?

Thanks in advance,

Quentin Conner
--------------
qac@occrsh.att.com
or att!occrsh!qac

Technical Details

Message-ID: <909@occrsh.ATT.COM>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!usc!brutus.cs.uiuc.edu!apple!uokmax!occrsh!qac

References:

<1015@mgse.UUCP> <5678@merlin.usc.edu> <3947@helios.ee.lbl.gov> <28@loop.UUCP> <11829@fluke.COM> <23323@cup.portal.com> <747@spock.UUCP> <Nov.8.23.30.45.1989.25291@topaz.rutgers.edu>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!usc!brutus.cs.uiuc.edu!apple!uokmax!occrsh!qac
From: qac@occrsh.ATT.COM (Quentin_Conner)
Newsgroups: sci.electronics
Subject: Re: two video questions
Message-ID: <909@occrsh.ATT.COM>
Date: 9 Nov 89 14:35:56 GMT
References: <1015@mgse.UUCP> <5678@merlin.usc.edu> <3947@helios.ee.lbl.gov> <28@loop.UUCP> <11829@fluke.COM> <23323@cup.portal.com> <747@spock.UUCP> <Nov.8.23.30.45.1989.25291@topaz.rutgers.edu>
Organization: AT&T Network & Data Systems, OKC
Lines: 15

Reply to Parent Message