Re: What is this tool called?

Article View: sci.electronics

Article #3696

#3696

From: Dave 'Post No Nicknames' Newton
Date: Mon, 13 Nov 1989 05:37

13 lines
1243 bytes

In article <6434@merlin.usc.edu> cyamamot@girtab.usc.edu (Cliff Yamamoto) writes:
>These screws look like you can torx them up pretty well considering the
>way the "star" pattern is made.  Thanks for any help!

   Umm, I could be wrong, but from what you described, they _are_ torx-head
screws, and a torx driver should do the trick.  If they are torx, you answered
your own question.

-- 
David L. Newton       | uunet!marque!carroll1!dnewton  | The Raging Apostle-- 
(414) 524-7343 (work) |    dnewton@carroll1.cc.edu     | for the future--
(414) 524-6809 (home) | 100 NE Ave, Waukesha WI 53186  | for the world.
"Isn't it fun to take two unrelated sentences and mix the batter lightly?" -me

Technical Details

Message-ID: <851@carroll1.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!uwm.edu!marque!carroll1!dnewton

References: <6434@merlin.usc.edu>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!uwm.edu!marque!carroll1!dnewton
From: dnewton@carroll1.UUCP (Dave 'Post No Nicknames' Newton)
Newsgroups: sci.electronics
Subject: Re: What is this tool called?
Keywords: screws, star pattern, tools
Message-ID: <851@carroll1.UUCP>
Date: 13 Nov 89 05:37:54 GMT
References: <6434@merlin.usc.edu>
Reply-To: dnewton@carroll1.UUCP (Dave 'Post No Nicknames' Newton)
Distribution: usa
Organization: Organization?  We don't need no steenkin' organization.
Lines: 13

Reply to Parent Message