video cameras

Article View: sci.electronics

Article #4031

#4031

From: William M. Hawkins
Date: Wed, 10 Jan 1990 03:32

24 lines
1112 bytes

Can anybody give me pinouts for the connectors on any of
the following cameras?  They were purchased as-is, without
accessories, books, or connectors.  I did trace enough
wires to power up the Magnavox 8274, but the viewfinder
has no vertical sync, and the main picture has some
vertical distortion.  I used 12 VDC for power.  Any leads
to literature or hardware (connectors) would be appreciated.
I don't even have an owners manual for any of them.

    General Electric 1CVC2030E, July 1981
      S/N 6G1H24156

    Magnavox VR8238BK01, Jan 1982
      S/N 31126098

    Magnavox VR8274BK01, July 1983
      S/N 32044031

Thanks in advance.

bill@bert.rosemount.com

P.S.  There was no response to this post in rec.video.

Technical Details

Message-ID: <8479@rosevax.Rosemount.COM>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!uunet!rosevax!bert.Rosemount.COM!bill

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!uunet!rosevax!bert.Rosemount.COM!bill
From: bill@bert.Rosemount.COM (William M. Hawkins)
Newsgroups: sci.electronics
Subject: video cameras
Message-ID: <8479@rosevax.Rosemount.COM>
Date: 10 Jan 90 03:32:46 GMT
Sender: news@rosevax.Rosemount.COM
Reply-To: bill@bert.rosemount.com
Lines: 24