Re: tin plating aluminum?

Article View: sci.electronics

Article #4058

#4058

From: Pekka Akselin
Date: Wed, 10 Jan 1990 17:47

16 lines
1084 bytes

john@frog.UUCP (John Woods) writes:

>Is there any practical way of tin plating aluminum (i.e. Miniboxes) so that
>it may be soldered?  In particular, I just got some Datak TINNIT (a solution

I read in a Great Brittain electronics magazine called 'Elektor' that
you can coat the aluminum with corn or olive oil and then scrape it
free from the oxide layer. The oil protects the bare aluminum from the
oxygen so that it won't oxide again. Now when you have bare aluminum
just solder it!

Sorry for my bad english.

-- 
Pekka Akselin               Nokia Data Systems AB            Linkoping, Sweden
eMail: pekak@nokia.se     Voice   : (nat) 013 117715      (inat) +46 13 117715

Technical Details

Message-ID: <1990Jan10.174756.5198@nokia.se>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ames!rex!samsung!cs.utexas.edu!uunet!mcsun!sunic!erilin!pekak

References: <11050@frog.UUCP>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ames!rex!samsung!cs.utexas.edu!uunet!mcsun!sunic!erilin!pekak
From: pekak@nokia.se (Pekka Akselin)
Newsgroups: sci.electronics
Subject: Re: tin plating aluminum?
Message-ID: <1990Jan10.174756.5198@nokia.se>
Date: 10 Jan 90 17:47:56 GMT
References: <11050@frog.UUCP>
Organization: Nokia Data Systems AB, Linkoping Sweden
Lines: 16

Reply to Parent Message