🚀 go-pugleaf

In article <126@gazette.bcm.tmc.edu>, andreask@watson.bcm.tmc.edu (Andreas Kasenides) writes:
> Can somobody more experienced indicate the source of materials or may be 
> a source of enclosures. I am not interested in enclosures that cost more than 
> the project that is inside ( that was one of the reasons I thought of 
> building my own boxes) 

One of my favorite lines of enclosures for many years now has been the 
Mod-U-Line Chassis and the Mod-U-Box enclosures.  These were initially 
designed by Intra-Fab in San Jose (or thereabouts) about 10 or 12 years ago. 
That was when I started using them.  They have since sold the design and 
manufacturing rights to Precision Fabrication Technologies, Inc., State Road 16
West, Monon, IN  47959.  Phone 1.800.558.7297, or 219.253.6666 in Indiana. 
I have not used any of the enclosures manufactured by PFT, so cannot comment 
on their manufacturing quality.  But the product line looks the same.  

The nice thing about this line is that all the pieces are universal, so you 
are not "stuck" with set sizes or options.  You can order the faceplate you 
want in the color you want, add either rack mount side plates or "handle" style 
side plates, you can order the depth you want, etc.  It is a modular product 
line ... Mod-U-Line.  

Check it out.  Hope this helps.  


-- 
	Marvin Jones 		 uucp:    {pyramid, tekbspa}!optilink!jones
	Optilink Corp. 		 bell-net: 707-795-9444 X 206 
	Petaluma, CA             CI$: 	   71320,3637